💾
JBizPro Backup Guard
Windows · version 1.0.19 · Ubuntu build available · free with any JBizPro plan
Copies the folders that matter - documents, photos, accounting files - to an external disk or a file server, and keeps the older versions.
What’s new
v1.0.19 latest
2026-10-18
Fixed: a job you just saved now shows up in the Settings list right away.
v1.0.8
2026-09-21
Fixes [Install now]: the Yes/No box could open behind the update window, so it looked like nothing happened. From this version, [Install now] starts the update right away.
Updating to this version: if no Yes/No box appears after [Install now], click the window behind it and press Y.
v1.0.7
2026-09-11
Fixes [Install now] doing nothing.
Pressing [Install now] could end with no message and no update - the program went quiet for 20 seconds and then gave up. The cause was the program waiting on itself: the install waited for monitoring to stop, while monitoring was waiting for the screen, which was blocked by the install. Now the install runs on its own, so it no longer blocks.
Also, if an update genuinely cannot be installed right now, it says so and tells you nothing has changed - and when one finishes, it tells you which version you are on.
v1.0.5
2026-09-11
You decide when to update. When a new version is out, a notice appears in the middle of the screen with what changed, and [Install now] / [Later]. Choosing Later brings it back in a few hours - it does not disappear. [Install update] is also in the tray menu.
Backup Guard no longer replaces itself without asking, and it waits for a running backup to finish before installing. This also fixes a fault that could leave a PC on an old version indefinitely: a new version was found but never installed.
v1.0.4
2026-09-09
Settings are no longer lost when the settings file is opened in Notepad.
Only one copy can run at a time, so two backups can no longer touch the same folder.
Uninstalling now removes the start-up entry as well.
This is the only guide we keep, so it never goes stale. The Manual link in the
program opens this same page.
1. Install on Ubuntu v1.0.19
There is no installer on Ubuntu - the download is the program, one single file.
Put it somewhere that belongs to you and make it executable.
- Download the Ubuntu build on the PC you want to back up. The file has no extension.
- Open a terminal in the folder you downloaded it to and run:
mkdir -p ~/.local/share/JBizBackupGuard
mv JBizPro_BackupGuard-*-linux ~/.local/share/JBizBackupGuard/JBizPro_BackupGuard
chmod +x ~/.local/share/JBizBackupGuard/JBizPro_BackupGuard
~/.local/share/JBizBackupGuard/JBizPro_BackupGuard
- An icon appears in the system tray (top-right). Double-click it for the main
window, right-click for the menu. No window opens by itself the first time
except the Activation window.
- It registers itself to start with your session - nothing to set up. It writes
~/.config/autostart/jbizpro-backupguard.desktop.
Why that folder. Two reasons.
- It has to be your own folder, not
/usr/bin. The program
updates itself by replacing its own file, and it cannot do that in a system
folder without a password - the update would fail every time.
- It keeps its settings, history and log next to itself, so they survive a
restart. Put it in
~/.local/bin and those files land in the middle
of your PATH folder.
Give each JBizPro program its own folder. Every one of them keeps
config.json and
license.json next to its own file.
Put two of them in the same folder and
they overwrite each other's settings and key.
~/.local/share/JBizGuard/ <- JBizPro IP Guard
~/.local/share/JBizBackupGuard/ <- JBizPro Backup Guard
This really happened (2026-09-25): both were put in
JBizGuard, IP Guard's
settings were replaced by Backup Guard's, and Backup Guard read IP Guard's key and
reported a bad key. If it has already happened, move the Backup Guard files out and
set up IP Guard again - its settings file is gone.
Already put it in
~/.local/bin? Move the whole set, not just the program -
the settings and the key have to travel with it, or the PC has to be activated again:
pkill -f JBizPro_BackupGuard
mkdir -p ~/.local/share/JBizBackupGuard
mv ~/.local/bin/JBizPro_BackupGuard ~/.local/bin/config.json ~/.local/bin/license.json \
~/.local/bin/history.db ~/.local/bin/backup_guard.log ~/.local/share/JBizBackupGuard/ 2>/dev/null
~/.local/share/JBizBackupGuard/JBizPro_BackupGuard &
Starting it from the new place rewrites the autostart entry by itself.
No tray icon? Ubuntu draws tray icons through the AppIndicator extension. It
ships with Ubuntu but can be switched off:
Log out and back in if it still does not show.
Starting it over SSH fails with “no $DISPLAY”. The program draws a
window, so it needs the desktop session - an SSH shell has none. Starting it from the
login session (which is what the autostart entry does) is fine. If you must start it
from SSH, hand it the session:
export DISPLAY=:0
export XAUTHORITY=$(ls /run/user/$(id -u)/.mutter-Xwaylandauth.* | head -1)
export DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/$(id -u)/bus
~/.local/bin/JBizPro_BackupGuard &
Somebody has to be logged in at the screen for that to work.
2. Activate
- On the Keys tab: name the PC →
Issue key. The key is shown once.
- The program opens its Activation window by itself. Paste the key, type a name for
this PC, and press Activate.
A key belongs to one PC. Changing computers is fine - press Release PC
on the Keys tab, then use the same key on the new one.
3. Choose what to back up
- Press Set up a backup.
- Folders to back up - add the folders that matter: documents, photos,
accounting files. Each is copied under its own name.
- Where to keep the backup - an external disk (Ubuntu mounts it under
/media/<you>/<disk name>), or a network folder that is
already mounted, such as /mnt/nas/backup.
Plug the disk in and open it once in Files first, so it is mounted.
- Press Use this folder for backups. The program writes a marker file and
does a real write test before it accepts the folder.
- Skip files matching (optional) and Keep old versions for
(90 days by default) → Save.
The marker file is what protects you. If the backup disk is not plugged in, the
program stops instead of quietly making a new
/media/you/BACKUP folder on the system
disk - the mistake that fills the system drive while you believe you have a backup.
Do not delete _backupguard.json from the backup folder.
4. What it does every day
It runs once a day at the time you set (12:00 by default). If the PC was off then, it
catches up shortly after the PC starts.
- New or changed files are copied.
- The previous version of a changed file is moved into
_archive\<date>\ before it is replaced.
- A file you deleted is moved into
_archive\<date>\ as well
- it is not deleted from the backup.
That last point is the reason to use this instead of a plain sync tool. If a file is
deleted by mistake, or scrambled by ransomware, the good copy is still in
_archive.
5. Getting a file back
You do not need the program. Open the backup folder in
Files and copy the file back. That is exactly
why the newest copy keeps the same folder shape as the original.
/media/you/BACKUP/MainPC/
├ Documents/ <- newest copy, same layout as the original
├ Pictures/
└ _archive/
├ 2026-09-05/Documents/contract.odt <- the version before that day's change
└ 2026-09-01/Pictures/deleted.jpg <- a file removed from the original
6. If something looks wrong
| What you see | What to do |
| “The backup disk is not connected” |
Plug the disk in (or reconnect the network folder) and press
Back up now. The program never writes somewhere else instead. |
| “This is a different disk than the one this backup was set up on” |
Another disk was mounted at the same place
(/media/<you>/<disk name> is reused when the label matches).
Connect the right one - or open Settings and pick the folder again to accept
the new disk. |
| “N files could not be copied” |
Usually files that were open at the time
(LibreOffice, Thunderbird).
Close them; the next run picks them up. The list is on the main screen. |
| “Permission denied” while copying |
The backup runs as you, so it can only read what you can read. Folders owned by
another user or by root are skipped - back those up from an account
that owns them. |
| The disk is plugged in but the program says it is not connected |
Ubuntu mounts a disk only when someone opens it. Open it once in Files,
then press Back up now. For a disk that must always be there, add it to
/etc/fstab so it mounts at boot. |
| “Not enough space on the backup disk” |
Old versions are cleared first, automatically. If it still does not fit, the
backup does not start - use a bigger disk, or lower
Keep old versions for. |
| It stopped and mentions the subscription |
The programs are free while a JBizPro plan is running. Renew on the Billing
page. Your backup files are never touched. |